Rigs Lab · Gear & fly fishing rigs + leaders

Build any rig.
Share it with every angler.

The rig builder and library for fishing. Lay out every cut, knot and turn to scale, start from a photo of a formula in a book, on a website or in your notebook, then publish it for anglers everywhere to tie, clone, share, print and fish.

rigs to tie
134
knots
42
fly lines
639
leader materials
128
  • Build it to scale

    Every section, knot and turn, drawn the way you tie it, with the cut list worked out for you.

  • Start from a photo

    Snap a formula from a book, a website or your notebook and it comes back as a rig you can edit.

  • Test it in the tank

    Watch it drift, sink and turn over before it ever touches the water.

  • Share it, print it

    Publish it to the library, send the link, or print a card for your vest.

Sort by

61 to 74 of 74 rigs

  • A 9-foot-4-inch (112 inch) tapered steelhead leader for 8 to 10-weight rods and floating lines, built to turn over weighted streamers and swung flies. Seven Maxima sections step from a 28 inch, 40 lb (.024") butt through short middle pieces to 30 inches of 10 lb (.012") Maxima Ultragreen tippet, joined with blood knots and a triple surgeon's knot. It is a workhorse for swinging and stripping streamers in steelhead runs.

    Total length9' 4"
    TechniqueStreamer
    Knots7
    Time to tie6min
    40 lb.024"
    Maxima Clear
    30 lb.022"
    Maxima Clear
    25 lb.020"
    Maxima Clear
    20 lb.017"
    Maxima Clear
    15 lb.015"
    Maxima Clear
    12 lb.013"
    Maxima Ultragreen
    10 lb.012"
    Maxima Ultragreen
    BUTT · 28"
    BUTT · 22"
    TAPER · 8"
    TAPER · 8"
    TAPER · 8"
    TAPER · 8"
    TIPPET · 30"
  • An 8-foot-8-inch dry-fly leader tapered from 30 lb butt to 2X tippet, built to turn over grasshopper imitations and other larger terrestrial patterns. The stout butt handles the weight and air resistance of bigger flies while the fine 2X tip provides the delicacy needed for drag-free presentation on selective trout.

    Total length8' 8"
    TechniqueDry
    Knots7
    Time to tie5min
    30 lb.022"
    Maxima Clear
    25 lb.020"
    Maxima Clear
    20 lb.017"
    Maxima Clear
    15 lb.015"
    Maxima Clear
    10 lb.012"
    Maxima Clear
    13 lb1X.010"
    RIO Powerflex
    10 lb2X.009"
    RIO Powerflex
    BUTT · 36"
    BUTT · 16"
    TAPER · 12"
    TAPER · 6"
    TAPER · 6"
    TAPER · 8"
    TIPPET · 20"
  • A 9' 10" tapered dry fly leader for trout on a 5-6 wt rod. It runs from a stiff .022" butt of Maxima Clear down through four more Maxima steps, then RIO Powerflex at .010" and .008" to a 24" tip of 4X at .007". The even taper turns over dry flies from #12 to #16 and lays the long tippet down with a little slack for a natural drift.

    Total length9' 10"
    TechniqueDry
    Knots8
    Time to tie5.5min
    30 lb.022"
    Maxima Clear
    25 lb.020"
    Maxima Clear
    20 lb.017"
    Maxima Clear
    15 lb.015"
    Maxima Clear
    10 lb.012"
    Maxima Clear
    13 lb1X.010"
    RIO Powerflex
    8.2 lb3X.008"
    RIO Powerflex
    6.4 lb4X.007"
    RIO Powerflex
    BUTT · 36"
    BUTT · 16"
    TAPER · 12"
    TAPER · 6"
    TAPER · 6"
    TAPER · 6"
    TAPER · 12"
    TIPPET · 24"
  • Kaufmann's 10-foot steelhead leader for a sink-tip line: 35 inches of .023 mono stepping through .021, .017 and .013 to 30 inches of 1X, .010. Blood knots join the heavy sections and a triple surgeon's knot joins the tippet. The sink tip takes the fly down, and the leader turns over a swung streamer on a 5-8 wt rod. There's also a 0X variation; see the questions below.

    Total length10' 0"
    TechniqueSteelhead
    Knots5
    Time to tie4min
    .023"
    .021"
    .017"
    .013"
    ~11.5 lb1X.010"
    BUTT · 35"
    TAPER · 25"
    TAPER · 15"
    TAPER · 15"
    TIPPET · 30"
  • A 54-foot tight-line mono rig for fishing weighted streamers and jigs to steelhead and big trout. It runs 564 inches of 20 lb Sunset Amnesia, 18 inches of 15 lb and 18 inches of 12 lb Maxima, a 4 mm heavy tippet ring, a 12 inch Cortland bi-color sighter and 36 inches of 0X fluorocarbon tippet. The thin mono replaces the fly line through the guides, so the fly sinks fast and you stay in direct contact with it.

    Total length54' 0"
    TechniqueSteelhead
    Knots4
    Time to tie3min
    20 lb.018"
    Sunset Amnesia monofilament neon green or clear
    15 lb.015"
    Maxima Clear
    12 lb.013"
    Maxima Clear
    Sighter · 12"
    12.4 lb.013"
    Cortland Indicator Mono Leader Material - Bi-color
    ~13 lb0X.011"
    BUTT · 47 FT
    TAPER · 18"
    TAPER · 18"
    TIPPET · 36"
  • A thin, light mono rig for tight-line nymphing small streams: 480 inches of .009 Maxima Chameleon, 24 inches of white Cortland indicator mono, then an 18 inch Cortland bi-color sighter. A 2 mm tippet ring below the sighter holds 36 inches of 5X fluorocarbon to a tungsten jig nymph. The thin butt sags very little, so small, light flies stay in contact.

    Total length46' 6"
    TechniqueEuro
    Knots5
    Time to tie3.5min
    6 lb2X.009"
    Maxima Chameleon
    8 lb2X.009"
    Cortland Indicator Mono Leader Material - White
    Sighter · 18"
    7.2 lb3X.008"
    Cortland Indicator Mono Leader Material - Bi-color
    Tippet · 36"
    ~4.5 lb5X.006"
    BUTT · 40 FT
    SIGHTER · 24"
  • A tight-line mono rig for small streams: 480 inches of neon green Sunset Amnesia as the casting line, a 36 inch step of 1X Maxima Clear, then a 16 inch Cortland bi-color sighter. A 2 mm tippet ring below the sighter holds 36 inches of 5X fluorocarbon to a tungsten jig nymph. The weighted fly does the work, with no indicator and no split shot.

    Total length47' 4"
    TechniqueEuro
    Knots5
    Time to tie3.5min
    12 lb.013"
    Sunset Amnesia monofilament neon green
    8 lb1X.010"
    Maxima Clear
    Sighter · 16"
    8 lb2X.009"
    Cortland Indicator Mono Leader Material - Bi-color
    Tippet · 36"
    ~4.5 lb5X.006"
    BUTT · 40 FT
    TAPER · 36"
  • A long tight-line mono rig for euro nymphing small streams. It runs 480" of 12 lb Maxima Chameleon (.013"), 24" of 8 lb Maxima Clear, 12" of neon red Sufix and 12" of neon green Amnesia, then a 16" Cortland bi-color sighter, joined with blood knots. A 2 mm tippet ring below the sighter holds 36" of 5X fluorocarbon to a tungsten jig nymph. There is no indicator or split shot: the fly is the weight and the colored mono shows the take.

    Total length48' 4"
    TechniqueEuro
    Knots7
    Time to tie5.5min
    12 lb.013"
    Maxima Chameleon
    8 lb1X.010"
    Maxima Clear
    8 lb1X.010"
    Suffix Superior monofilament neon fire (neon red)
    8 lb1X.010"
    Sunset Amnesia monofilament neon green
    Sighter · 16"
    8 lb2X.009"
    Cortland Indicator Mono Leader Material - Bi-color
    Tippet · 36"
    ~4.5 lb5X.006"
    BUTT · 40 FT
    TAPER · 24"
    TAPER · 12"
    TAPER · 12"
  • Lefty Kreh's simple 9-foot leader: about half butt, a quarter middle, and the rest a short step and tippet. Here that is 48 inches of .024 mono, 24 inches of .021, 12 inches of .018 and 24 inches of .013 at the fly, joined by three blood knots. Built for a 7-8 wt line, it turns over streamers, bass bugs and light saltwater flies.

    Total length9' 0"
    TechniqueStreamer
    Knots4
    Time to tie3.5min
    .024"
    .021"
    .018"
    .013"
    BUTT · 48"
    TAPER · 24"
    TAPER · 12"
    TIPPET · 24"
  • A short, stiff 7-foot (84 inch) leader for 4-7 wt lines. It steps from an 11 inch .021 butt through .019, .017, .015, .013, .011 and .009 to 16 inches of 3X at .008. The heavy butt and short length turn over bushy dries, hoppers, small streamers and other wind-resistant flies with accuracy.

    Total length7' 0"
    TechniqueDry
    Knots8
    Time to tie6min
    .021"
    .019"
    .017"
    .015"
    .013"
    ~13 lb0X.011"
    ~9.5 lb2X.009"
    ~8 lb3X.008"
    BUTT · 11"
    TAPER · 11"
    TAPER · 15"
    TAPER · 13"
    TAPER · 6"
    TAPER · 6"
    TAPER · 6"
    TIPPET · 16"
  • Ray Bergman's 8 foot nymph leader. Six 16 inch sections of mono taper from .017" at the butt to .006" (5X) at the tip, with blood knots in the butt and triple surgeon's knots through the 0X, 2X and 5X pieces. It is a short, controllable leader for one nymph on a 3 to 5 weight rod. There is also a 4X variation; see the questions below.

    Total length8' 0"
    TechniqueNymph
    Knots6
    Time to tie4min
    .017"
    .015"
    .013"
    ~13 lb0X.011"
    ~9.5 lb2X.009"
    ~4.5 lb5X.006"
    BUTT · 16"
    TAPER · 16"
    TAPER · 16"
    TAPER · 16"
    TAPER · 16"
    TIPPET · 16"
  • Ray Bergman's 8 foot steelhead leader, 95 inches in all. Five 19 inch sections of mono step down from .021" at the butt to .011" (0X) at the tip, joined with blood knots and a triple surgeon's knot. It is a short, stout taper that turns over a swung wet fly on a floating line and holds a steelhead in heavy current.

    Total length7' 11"
    TechniqueSteelhead
    Knots5
    Time to tie4min
    .021"
    .019"
    .017"
    .014"
    ~13 lb0X.011"
    BUTT · 19"
    TAPER · 19"
    TAPER · 19"
    TAPER · 19"
    TIPPET · 19"
  • A 9 foot 2 inch leader for emergers and wet flies that tapers from a .017 inch butt in six sections to a 30 inch 4X (.007 inch) tippet. The even steps turn the fly over on 3-5 wt rods, and the long tippet lets an emerger ride in the surface film or a wet fly sink and swing without drag.

    Total length9' 2"
    TechniqueWet
    Knots6
    Time to tie4min
    .017"
    .015"
    .013"
    ~13 lb0X.011"
    ~9.5 lb2X.009"
    ~6.5 lb4X.007"
    BUTT · 10"
    TAPER · 10"
    TAPER · 20"
    TAPER · 20"
    TAPER · 20"
    TIPPET · 30"
  • A 24-foot nymphing leader for fishing tight-line on a 3-5 wt. It runs 112" of .016" butt, 35" each of .014" and .012", a 35" 1X (.010") sighter, 20" of 4X (.007") and 48" of 5X (.006") tippet to a size 16 tungsten-bead nymph. The long leader keeps the heavy fly line out of the drift, so the nymph sinks and drifts with little drag.

    Total length23' 9"
    TechniqueEuro
    Knots6
    Time to tie3.5min
    .016"
    .014"
    .012"
    ~11.5 lb1X.010"
    ~6.5 lb4X.007"
    ~4.5 lb5X.006"
    BUTT · 9.3 FT
    TAPER · 35"
    TAPER · 35"
    SIGHTER · 35"
    TIPPET · 20"
    TIPPET · 48"