Rigs Lab · Gear & fly fishing rigs + leaders
The rig builder and library for fishing. Lay out every cut, knot and turn to scale, start from a photo of a formula in a book, on a website or in your notebook, then publish it for anglers everywhere to tie, clone, share, print and fish.
Build it to scale
Every section, knot and turn, drawn the way you tie it, with the cut list worked out for you.
Start from a photo
Snap a formula from a book, a website or your notebook and it comes back as a rig you can edit.
Test it in the tank
Watch it drift, sink and turn over before it ever touches the water.
Share it, print it
Publish it to the library, send the link, or print a card for your vest.
4 rigs
A 5.5-foot steelhead leader with a heavy point: 28" of .026" mono joined with a double uni knot to 38" of .017" mono. Built for sink tips and Skagit heads on 7-9 wt rods, it keeps the fly near the depth of the tip and the thick point shrugs off rocks, wood and hard takes.
A 5.5-foot steelhead leader with a heavy point: 28" of .026" mono joined with a double uni knot to 38" of .016" mono. Built for sink tips and Skagit heads on 7-9 wt rods, it keeps the fly near the depth of the tip and the thick point shrugs off rocks, wood and hard takes.
A 10.5-foot swing leader for salmon and steelhead on 8-10 wt rods. A 38" butt of .022" mono steps through four 13" pieces at .018", .016", .014" and .013" to a 36" tippet of .012". The stiff butt and even steps turn a swung fly over on a floating line.
An 11.5-foot heavy mono leader for swinging big flies to salmon on a 9-11 wt. A 55 inch butt of .024" steps down through 37 inches of .020" and 28 inches of .018" to an 18 inch tip of .016", joined with blood knots. The heavy butt turns over large tube flies and weighted salmon flies, and the stout tip holds a big fish in strong current.
