I built this rig to get a weighted hex fly down to the lake bottom where trout are waiting for natural hex emergers to rise up the water column. It uses a slip bobber to suspend the fly 12 to 24 inches above the bottom in 15 to 35 feet of water, letting me fish without casting while the fish camp in place before they start moving up to chase the hatch.
Indicator rigs
Indicator rigs and leader formulas, each with the cut list, the knots and their turns, and the tying time.
- Total length28' 0"TechniqueNymphKnots4Time to tie2minCABy Chad Alderson
A 10' 8" indicator nymphing leader on Maxima Chameleon. The butt steps from .017" to .010", then 18" of .009" runs to a 4 mm heavy tippet ring, with 24" of 3X and 24" of 4X fluorocarbon below it. A 3/4" trapped-air indicator, one No. 4 split shot and a #16 Tungsten Bead Pheasant Tail make it a ready-to-fish indicator rig for riffles and runs.
Total length10' 8"TechniqueIndicatorKnots6Time to tie4minBBy BarblessGary Borger's 9-foot leader for bouncing a nymph along the bottom: 45" of .020" butt, 17" of .013", and a long 45" tippet of 0X (.011"). Two No. 4 split shot ride 10" above a size 8 stonefly nymph, and a small yarn indicator on the butt shows the take. The stout tippet holds up to the shot, snags and big fish on 4-7 wt rods.
Total length8' 11"TechniqueIndicatorKnots3Time to tie1.5minBBy BarblessA 15.5-foot stillwater indicator rig for hanging a small chironomid near the bottom of a clear lake. An 18" butt of 20 lb Seaguar Blue Label leads into 120" of 10 lb (2X, .009") Blue Label, a #12 barrel swivel and 48" of 5X (.006") fluorocarbon to a size 16 tungsten-bead chironomid. A 7/8" release indicator rides near the top, and a No. 4 split shot sits just above the swivel.
Total length15' 6"TechniqueIndicatorKnots2Time to tie1minBBy BarblessA 15.5-foot stillwater indicator rig for hanging a chironomid near the bottom of a lake. An 18" butt of 20 lb Seaguar Blue Label leads into 120" of 10 lb (2X, .009") Blue Label, a #12 barrel swivel and 48" of 4X (.007") fluorocarbon to a size 14 tungsten-bead chironomid. A 7/8" release indicator rides near the top, and a No. 4 split shot sits just above the swivel.
Total length15' 6"TechniqueIndicatorKnots2Time to tie1minBBy BarblessA simple indicator nymphing leader, 12' 11" long, for a 5-6 wt line. It starts with a 22" butt of .012" mono and 79" of 0X mono, then steps down through 20" of 3X fluorocarbon to 22" of 5X fluorocarbon. Below that is a 2 mm tippet ring and a final 12" of 5X to the fly. A 1/2" trapped-air indicator rides on the 0X, and a BB split shot sits just above the ring to get the nymph down.
Total length12' 11"TechniqueIndicatorKnots6Time to tie3minBBy BarblessA 17-foot leader for nymphing under an indicator at short range on a 3-5 wt. It steps down in 29" sections from .018" through .016", .014" and .012" to 1X (.010"), then a 23" 3X (.008") sighter and 40" of 5X (.006") tippet. A 1/2" trapped-air indicator rides on the 1X section, and a No. 4 split shot sits 10" above a size 16 bead-head nymph.
Total length17' 4"TechniqueIndicatorKnots7Time to tie4.5minBBy Barbless